Renovated Engine VW Volkswagen Golf V 2.0 GTI 169KW 230PS BYD 2006-08 Euro4

  
Refurbished VW Volkswagen Golf V 2.0 GTI 169KW 230PS BYD 2006-08. This product sheet has been automatically translated. If you have any questions, feel free to contact us. USED AND RECONDITIONED AND PARTIALLY RENEWED. OVER 10 YEARS OF EXPERIENCE. We have been a member of the "FairCommerce" initiative since June 8, 2016. Item - Original and sample images. P premature delivery - depends on the carrier. G warranty - please read the terms and conditions. We sell online with many years of experience and specialize in engines and transmissions of all car brands. You can purchase almost any engine and transmission from us. You can also find very rare parts with us. We have the lowest prices in Germany. Please note that we are a company based in Germany and that our parts are verifiable and come from vehicle recycling! These are certainly not stolen goods! We warn against resellers whose product range origin cannot be verified. VW GOLF V 2.0 GTI. 12 MONTHS - PLEASE READ TERMS AND CONDITIONS. The engine is overhauled, which means: Engine with new main bearings, new connecting rod bearings, new oil seals, and new piston rings.

The pistons and connecting rods are new. Cylinder liners - new or reconditioned.

The crankshaft is standard and balanced, the dimension is standard. The cylinder head is pressed and machined flat, after density and pressure testing have been performed. New valves only if necessary. The valve seats are ground.

Renewal of hydraulic elements, rockers, valves, and valve guides. Measurement and replacement of the camshaft. Please adjust the valves only if necessary. The return of your engine is included. If there are any issues with the engine/transmission after installation, please contact us.

We will strive to find a solution that is favorable for you. This engine/transmission is a spare part. The price only applies to the return of the old part.

It is necessary to return the old part! The deposit/old part must be prepared for shipping within 7 days after pickup. The seller covers the return transport of the old part. As soon as we receive your old part, you will receive a credit corresponding to the amount of the deposit. We only ship the goods after payment of the purchase price and the deposit fee.

Important - applies to the deposit of the old part! The old engine must not be rusty, cracked, or welded inside. ENGINE INSTALLATION and first start after installation - WARRANTY When installing the engine, all attachments must be checked. Please install a new oil cooler and keep the corresponding invoice - if necessary, an oil cooler is available.

Installing the engine with an old oil cooler and metal shavings is not covered. Please take this recommendation seriously. The oil line must be free of contaminants; otherwise, the engine will be contaminated (please completely remove metal shavings and oil sludge from the oil line).

Dual-mass flywheel - please check or install a new one and keep the corresponding invoice. Injectors - please check or install new ones and keep the invoice for that. Turbocharger - please check or install a new one and keep the invoice. Please clean the turbo intake system, including the intercooler, or install a new one. And cancel the corresponding invoice.

Please use the engine oil as described in the designation (see above). Please change the engine oil every 10,000 km.

After the first start, please measure the oil pressure. Please change the oil after the first mileage of 2,000 km. The next oil change should take place after 10,000 km. Oil changes must be performed every 10,000 km. For your safety, please always check the oil pressure after each respective mileage of 10,000 km.

To ensure correct engine operation and avoid engine damage: 1. Please check the injector dosage. The control unit must be programmed with the integrated diagnostic system (IDS). Run the "Teach Injectors" process - via IDS.

Please keep the expressions of the IDS. Failure to comply with these instructions may void the warranty.

This is mandatory but not for all car brands!! When starting, it is necessary to do the following: Programming the high-pressure pump and calibrating the injection nozzle!!! Please check the oil pressure when the engine is cold and hot. The engine has a new main bearing, new connecting rod bearings, and new piston rings.

Before the first start, ensure that the injectors are at 100%. Starting: Please start the engine for 15 seconds, then turn it off again. Please wait 5 to 10 minutes. Repeat this process 3 times.

After this step, turn off the engine for 3-4 hours. After 3-4 hours, you can take a test drive. Please do not fully press the accelerator pedal, that is, drive gently and slowly for the first 1,000 kilometers. Speed up to 2000 rpm/min. After 2,000 km, please change the engine oil and oil filter.

The next oil change should take place after 10,000 km. Change the engine oil every 10,000 km.

We will be happy to answer your questions. All automotive parts come from recycling cars or test cars. Therefore, most engines and transmissions have low mileage, that is, between 500 and 3,000 km. We specially import very rare automotive parts for you from other countries, such as Japan, the USA, or Great Britain.

As you can see, we are guided by your individual order! All parts are 100% checked and sold with a 12/24 month warranty. All used parts are used and show signs of wear but are fully functional.

GOODS WILL BE SHIPPED IMMEDIATELY AFTER RECEIPT OF PAYMENT. Delivery by RABEN or DHL. Of course, all parts are checked before shipment.