Renewed engine vw volkswagen golf v 2.0 gti 169kw 230ps byd 2006-08. This product sheet has been automatically translated. If you have any questions, please do not hesitate to contact us. Used and reconditioned and partially renovated.
More than 10 years of experience. We have been a member of the Fair Commerce initiative since 8 June 2016. Article - original and examples of images.
P premature delivery - depends on the carrier. G guarantee - please read the terms and conditions.
We sell online with many years of experience and are specialized in engines and gearboxes of all car brands. You can buy almost all the engines and transmissions from us. You can also find very rare pieces in our home. We have the lowest prices in Germany.Please note that we are a company based in Germany and that our parts are verifiable come from vehicle recycling! It's probably not stolen property! We warn against resellers whose origin of their product range cannot be verified. Vw golf v 2.0 gti. 12 months - please terms and conditions. The engine is revised, which means: engine with new main bearing, new rod bearings, new oil joints and new piston segments. Pistons and rods are new.
Cylinder Shirts - new or roded. The crankshaft is nominal and balanced, the dimension is nominal. The head is pressed and rectified flatly after the density and pressure have been tested.
New new valve head joints only if necessary. Without a set of creased belts.
Renewal of hydraulic components, hoses, valves and valve guides. Measuring and replacing the camshaft. Please set the valves only if necessary.
The return of your engine is included. If there are problems with the engine/transmission after the installation, please contact us.
We will strive to find one for ourselves and find a solution for you. This engine/transmission is a spare part. The price applies only to the return of the old coin. It is necessary to return the old room!
The deposit / old part must be prepared for shipment within 7 days of removal. The seller takes care of the transport back from the old room. As soon as we receive your old coin, you will receive a voucher corresponding to the amount of the deposit. We only ship the goods after payment of the purchase price and the deposit fee. Important - applies to the deposit of the old room!
The old engine shall not be rusted, cracked or welded inside. Installing the engine and the first start after installation - guaranteed when installing the engine, all attachments must be checked. Please install a new oil cooler and keep the corresponding invoice - if necessary, an oil cooler is available.The installation of the engine with an old oil cooler and metal chips is not subject. Please take this recommendation seriously. The oil pipe must be free of contaminants, otherwise the engine will be contaminated (please remove the metal chips and oil sludge from the oil pipe completely) 2. Double-mass engine steering wheel - please check or install a new one and keep the corresponding invoice.
Injectors - please check or install new ones and keep the invoice for them. Turbocharger - please check or install a new one and keep the invoice. Please clean the turbo intake system, including the intermediate cooler, or install a new one.And cancel the corresponding bill. Please use the engine oil as described in the designation (see above). Please change the engine oil every 10,000 km. After the first start, please measure the oil pressure.
Please change the oil after the first 2,000 km. The next oil drain must be carried out after 10,000 km. The discharge must be carried out every 10,000 km. For your safety, always check the oil pressure after the respective mileage of 10,000 km. To achieve correct engine operation and avoid damage to the engine: 1.
Please check the dose of the injector. The control unit must be programmed with the integrated diagnostic system (ids). Run the "teach injectors" process - via ids. Please keep the id expressions. Failure to comply with these instructions may cancel the guarantee.
This is mandatory but not for all car brands!! When starting, it is necessary to do the following: High pressure pump programming and calibration of the injection nozzle!!! Please check the oil pressure when the engine is cold and hot.The engine has a new main bearing, new rod bearings and new piston segments. Before the first start, make sure the injectors are 100%. Start: Please start the engine for 15 seconds and then turn it off again. Please wait 5 to 10 minutes. After this step, turn off the engine for 3-4 hours.
After 3-4 hours, you can do a road test. Please do not press the accelerator pedal completely, i. Gently and slowly during the first 1,000 kilometres drive. Speed up to 2000 rpm/min.
Vmax 120 km/h after 2,000 km, please change the engine oil and oil filter. The next oil drain is expected to take place after 10,000 km. Vibrate the engine oil every 10,000 km. We will be happy to answer your questions. All automotive parts come from the recycling of test cars or cars.
As a result, most engines and transmissions have little mileage, i. Between 500 and 3000 km. We import especially for you very rare car parts from other countries, such as Japan, the United States or Great Bretagne.
As you can see, we are guided by your individual order! All parts are 100% controlled and sold with a 12/24 month warranty.
All the parts used are used and show signs of wear, but are fully functional. The goods will be shipped immediately after receipt of payment. Delivery by raben or dhl.Of course, all parts are checked before shipment. This item is in the category "auto, motorcycle - parts, accessories\ automobile: parts and accessories\motors and engine parts\motors". The seller is "amg-art" and is located in this country: de.
This item can be shipped to the following countries: europe, asie.